Restore's Source Not What Was Expected

Have questions about Backup4all, or having problems using it? Ask here for help.
Post Reply
wacole
Posts: 15
Joined: Thu Sep 23, 2010 3:22 pm

Restore's Source Not What Was Expected

Post by wacole » Thu Jan 31, 2019 9:21 pm

Running Backup4All v 7.4 in a Windows 10 environment.

I have a backup job whose source is on a directory on my C drive and
is targeted to backup to optical disks. I ran backup
on my target directory and all finished cleanly after the test
was done, creating 16 disks for a 102 gb backup. (I'll never make
one that large again!)

Now just to be sure everything worked as expected, I wanted to do a
test restore of a couple of files from the backup. When I select the
files to restore, instead of restoring from the optical disks, the
restore appears to use the files on the C drive's directory. I say appears because
Backup4All does not ask for optical discs to be mounted, but doesn't
specifically identify the source it is using. (The C-drive files which
were backed up will be removed after I am able to
satisfactorily restore from the optical media.)

I checked the properties on the backup job and it indeed
uses optical as the target and points to the correct DVD/CD
drive.

What have I done wrong, please?

Thanks,
Bill Cole

Support
Posts: 1447
Joined: Wed Dec 16, 2009 12:46 pm
Location: Cluj-Napoca, Romania
Contact:

Re: Restore's Source Not What Was Expected

Post by Support » Mon Feb 04, 2019 1:16 pm

Hi,

To make sure the files are restored from the optical drive, you can rename the source folder before running the restore.

Post Reply