50 GB/hour - configuration details

Have questions about Backup4all, or having problems using it? Ask here for help.
bohica2012
Posts: 2
Joined: Mon Dec 03, 2018 6:52 pm

50 GB/hour - configuration details

Postby bohica2012 » Fri Dec 07, 2018 4:03 pm

I am currently testing B4A under a trial license. My initial tests so far have been successful, however, the total throughput is wanting.

There have been at least 2 items from a few years back that I have found in these forums which cite a performance figure of 50 GB/hour. My out-of-the-box without any changes to default parameters is giving me about 20 GB/hour. Obviously, there are a lot of variables which would effect performance and throughput.

My question is to better understand how that 50 GB/hour is achieved. I would like to be able to do an apples-to-apples comparison but without knowing both the hardware and software environments used when generating that number, that is difficult at best.

Can any one given some specifics about the setup which yields that 50 GB/hour figure?

Return to “Support & Troubleshooting”